Quick answer: Poor pallet wrapping can leave an export load shifted, crushed, or mouldy by the time it arrives. Good wrapping starts with a dry export pallet and a square load: stretch wrap ties the cartons firmly to the pallet, and a top sheet over a dry load keeps condensation off. This guide explains how to wrap a pallet for container shipping, what to watch for with moisture, and how wrapping affects container weight and space.
Why does export pallet wrapping matter more?
An export pallet may spend weeks moving through warehouses, trucks and ships while crossing different climates. During the journey, it can be lifted by forklifts, jolted in transit, rocked at sea, and exposed to heat and humidity.
Proper wrapping keeps the load stable as one unit. If it is wrapped poorly, goods can shift, collapse, or arrive damaged, and the exporter may bear the cost.
The export pallet and wrapping contribute to the load’s total weight and size, which can affect your freight bill depending on the shipping method:
- FCL (full container load): The pallet, wrapping and cargo all count towards the packed container’s gross weight. Pallet size also affects how many pallets fit in a 20ft or 40ft container.
- LCL (less than container load): Charges are generally based on weight or volume, whichever produces the higher charge. Keeping the load square and within the pallet’s edges avoids paying for unnecessary space.
- Air freight: Charges are generally based on actual or volumetric weight, whichever is higher. A lighter pallet can reduce costs when actual weight determines the charge. As Blackmores explains, pallet weight adds no sales value but uses up transport capacity.
How do you wrap export pallets for container shipping?
The right pallet wrapping method depends on the goods and the receiver’s requirements. Exporters typically secure export pallet loads with stretch wrap, shrink film, or strapping.
Stretch wrap is a thin plastic film applied by hand or machine. Its tension holds the cartons together and secures them to the pallet.
The exact steps vary, but wrapping export pallets with stretch wrap usually involves the following:
- Start with dry pallets and packaging. Moisture from wet timber or damp packaging can cause condensation and mould during long voyages. Plastic export pallets do not absorb moisture or require ISPM 15 treatment.
- Stack cartons securely. Keep them within the pallet’s edges, place heavier cartons at the bottom and align each layer. Follow all stacking and orientation markings.
- Secure the cartons to the pallet. Wrap the cartons and pallet together so the load can be handled as one unit.
- Use suitable film and strapping. Choose a film strong enough for a long sea journey. Add strapping and corner protectors for heavy or unstable loads.
- Cover only dry loads. A top sheet protects cartons from dripping condensation, but covering damp goods can encourage mould.
- Secure pallets inside the container. Fill gaps and block or brace pallets to prevent movement.
How do you stop moisture damage in a shipping container?
Moisture damage can rust metal goods, grow mould, and weaken cartons until stacks collapse. Much of that moisture comes from the cargo, packaging and pallets. When the container cools, the moisture condenses on the roof and drips onto the goods. This is often called container rain.
Pallet wrapping keeps drips off the cartons, but it can’t dry out a damp load, so the wrapping steps above only work if everything going into the container is dry. Three more things help:
- Be wary of damp timber pallets. Timber that hasn’t fully dried can grow mould. Blackmores stopped using custom timber pallets for export after finding mould on them, and switched to plastic export pallets.
- Don’t rely on desiccants alone. Desiccants help keep a dry load dry, but they rarely have enough capacity to fix cargo that is already damp.
- Check the container before loading. It should be weatherproof. Close the container doors and check for light through holes. Look for rust streaks around repaired areas, which may indicate leaks.
Which export pallet works best for a wrapped export load?
A plastic export pallet provides a clean base for securing the wrap. It has no nails or splinters to tear film, no damp timber and no ISPM 15 treatment. Ozkor, an ISO 9001-certified Australian manufacturer, makes its export pallets to consistent dimensions, so the same wrap pattern fits pallet after pallet.
Blackmores exports to the Asia-Pacific on the Expal-1140, and all three models fit Ozkor’s reusable pallet wraps.
| Ozkor export pallet | Size (mm) | Weight | Entry |
|---|---|---|---|
| Expal-1140 | 1140 × 1140 × 120 | 8.2 kg | 2-way |
| Expal-1100 | 1100 × 1100 × 120 | 7.5 kg | 4-way |
| Expod-1210 | 1200 × 1000 × 140 | 8 kg | 4-way, nests 4:1 |
Frequently asked questions
How many times should you wrap an export pallet?
There is no fixed number. It depends on the load’s weight, carton strength, film type and whether you wrap by hand or machine. The wrap should hold the cartons firmly to the export pallet, so the cartons and pallet move as one unit.
What is the difference between stretch wrap and shrink wrap?
Stretch wrap is stretched around the load to hold it in place. Shrink wrap uses heat to shrink tightly around it. Both can secure goods to an export pallet; the choice depends on the goods and the receiver’s requirements.
Do plastic pallets need ISPM 15 treatment?
No. ISPM 15 covers wood packaging, so plastic pallets are exempt from it. The destination country can still set its own import rules, so check with your importer.