Export Plastic Pallets Australia: The Buying Guide

Key takeaway: The right export plastic pallet depends on your shipment, reuse cycle and handling requirements. Timber may suit genuinely one-way shipments, while export plastic pallets are generally better suited to repeat-use operations, where they can reduce cost per trip and replacement waste, avoid ISPM-15 heat treatment or fumigation, and support consistent handling. Compare each model’s load rating, racking suitability, and entry options before ordering.

This guide sets out the key specifications, compliance requirements and costs to consider when buying export plastic pallets in Australia.

Are Export Plastic Pallets Better Than Timber Pallets?

It depends on the shipment and handling environment. Timber may suit genuinely one-way shipments where the pallet will not return and requirements for repeated use, hygiene or automated handling are limited.

For repeat-use export operations, export plastic pallets generally suit shipping and warehouse processes that require durability, hygiene, consistent dimensions, and reuse.

Timber can absorb moisture and contaminants, become heavier, warp or splinter, while moulded plastic pallets maintain more consistent dimensions and have no nails or splinters.

A detailed comparison is available in this plastic and timber pallet comparison.

Are Export Plastic Pallets Cheaper Than Timber Pallets?

It depends. You need to compare cost per trip, not purchase price alone. Timber pallets generally have a lower upfront price and may remain the lower-cost option for genuinely one-way, low-value shipments.

For high-volume export operations, export plastic pallets usually achieve a lower cost per trip when reused across multiple cycles. Their longer service life spreads the initial cost over more trips and can reduce repair and replacement costs. Because export plastic pallets contain no timber, they fall outside ISPM-15 treatment requirements for wood packaging, helping you avoid heat-treatment or fumigation costs.

You need to compare options based on load, handling conditions, product damage, export treatment and end-of-life value. See this total cost of ownership breakdown.

What Other Benefits Do Export Plastic Pallets Offer?

Sustainability: In repeat-use or closed-loop systems, reusable plastic pallets can reduce replacement waste and be recycled into new pallets at the end of their service life. Sustainability guidance notes that timber may be lower-impact for genuinely single-use shipping, while reusable plastic is better suited to repeat-use systems.

Handling efficiency: In a Strandbags case study, staff could pick up and replace 8 kg plastic pallets in live storage racking, reducing reliance on forklifts and supporting more efficient handling. Consistent dimensions and tare weights can also support more predictable warehouse, racking and automated handling, subject to model-specific requirements.

Safer Handling: Plastic pallets are lighter and consistent in weight and have no nails or splinters. These features can reduce specific lifting, laceration and puncture hazards, although pallets are only one part of a broader workplace safety program, as explained in this manual-handling analysis.

What Should You Check Before Ordering Export Pallets?

Before you order, confirm the following for your own shipments.

  • Destination requirements. Confirm with your importer or quarantine authority which pallet types each destination market accepts, and what documentation is needed.
  • Pallet return plan. Decide whether pallets will be returned, reused, resold or discarded at destination, and ask the supplier whether the model retains residual value in that market.
  • Trip count and cost model. Use your own trip data, and ask suppliers to model cost per trip rather than quoting unit price alone. Trip numbers depend on load, handling, and environment, so don’t assume them.
  • Real load and racking limits. Compare dynamic, static, and racking ratings with your actual load per pallet, and check restrictions such as drive-in racking.
  • Container fit and handling equipment. Check dimensions, tolerance, and tare weight against container internal dimensions, and confirm forklift and pallet jack entry (2-way or 4-way) and any automation requirements.
  • Operating environment. Confirm temperature range, washing or hygiene requirements, and whether you need a light or heavy-duty pallet.
  • Trial and supply. Ask about trial options, lead times, phased delivery, and delivery in full and on time.

Ozkor Export Plastic Pallets: A Comparison

Specification Ozkor EXPAL-1140 Ozkor EXPAL-1100 Ozkor EXPOD-1210
Dimensions 1140 × 1140 × 120 mm 1100 × 1100 × 120 mm 1200 × 1000 × 140 mm
Pallet weight 8.2 kg 7.5 kg 8 kg
Material Polypropylene co-polymer (PPC) Polypropylene co-polymer (PPC) High density polyethylene (HDPE)
Type Grille top and bottom decks Grille top deck and base Grille deck with a nestable pod design
Dynamic load capacity 1,000 kg – 400 kg
Static load capacity 3,000 kg – 2,000 kg
Beam racking capacity 500 kg* – –
Load capacity (SWL) – 1,000 kg* –
Forklift & pallet jack entry 2-way 4-way 4-way
Nesting ratio – – 4:1
Notes * Evenly distributed beam racking only. Do not use in drive-in racking. Dimensional tolerance: ±5 mm. * Shelf racking only. Dimensional tolerance: ±5 mm. Dimensional tolerance: ±5 mm.

Why Choose Ozkor Export Plastic Pallets?

Made in Australia, supplied locally. Ozkor manufactures its export plastic pallets in Sydney. Ozkor brought production back to Australia, which provides a more reliable platform for servicing the local market. Blackmores describes the supply as strong and consistent, even through recent supply chain disruption.

Proven in high-volume Australian supply chains. Strandbags trialled the Expal-1140 for eight months, then phased in 6,000 pallets at its Sydney distribution centre alongside its warehouse expansion. Blackmores reports consistent quality, quick turnaround with delivery in full, and supply that has kept pace with both increases and decreases in demand. It is the reliability exporters want when buying plastic pallets in Australia.

Residual value. Overseas customers can reuse the export plastic pallets or resell it to other exporters. This recovers some costs and avoids the disposal expenses associated with single-use timber pallets.

Design support and supply options. Ozkor is an ISO 9001-certified Australian manufacturer that offers design and development support, including consultation and step-by-step project management for bespoke pallets. Its export plastic pallets are available for purchase or rental.

Frequently Asked Questions

Can Ozkor Make a Custom Export Pallet Size?

Yes. Ozkor can discuss bespoke plastic pallet design for specific applications. Its development process includes consultation, CAD and project management, with custom dimensions subject to technical assessment.

Which companies use Ozkor Export plastic pallets?

Ozkor’s named customers include Woolworths, Nestlé, Blackmores, DHL Supply Chain, Capral, ResMed and Teys, spanning retail, food, supplements, logistics, building materials and medical devices.

Are Ozkor Export Pallets Made in Australia?

Yes. Ozkor manufactures its plastic pallets and bulk bins in Australia and holds ISO 9001 certification.

Ready to order? Send Ozkor your requirements using the form below, and the team will recommend a suitable model.

If you'd like to learn more get in touch with our team by completing the form below.

Get In Touch

Our friendly team are ready to assist!

ADDRESS

3/44 Bessemer Street,
Blacktown, NSW 2148

CUSTOMER SUPPORT & SALES

1800 001 433

PHONE

(02) 9672 8588

FAX

(02) 9672 4100